FAQ

Questions before you start

  • A Rithmic login from your prop firm or broker, and a Windows 10 or 11 PC. Crypto data needs no account.

    You also need a plan: $9 for your first 14 days, then $20, then $29 a month.

    Mac works too, in beta. Your firm or broker bills the market data. Learn more

  • Yes, if your firm gives you a Rithmic login. A free Rithmic demo does not work.

    Apex, 4PropTrader, Bulenox, Take Profit Trader, BluSky, Lucid Trading and AMP Futures work today.

    Some firms also sell Tradovate accounts: pick the Rithmic one. See every firm

  • Not to us. Your firm or broker bills the market data. Crypto feeds are free.

    Exchange fees stay between you and your firm or broker.

    Databento and ThetaData are paid services you subscribe to yourself, only if you want them. Learn more

  • No. It pays for your first 14 days of the full app. Then $20 for the first month, then $29 a month.

    It is charged once when you start, so you need a card. Cancel before day 14 and nothing else is charged. Learn more

  • Yes, in beta. Windows 10 or 11 is the main version.

    One download for Apple Silicon and Intel. Apple has not signed it yet, so the first launch needs one extra click.

    A few things are Windows only for now: voice for Jarvis and the managed ThetaData terminal. On a Mac? Read this first

  • Yes, once. Ask within 14 days of your first payment and we refund it in full.

    No reason needed. The refund ends your plan and your access.

    Later payments are not covered by this guarantee. Your legal rights stay. You can cancel any time and keep the time you paid for.

  • From your account page. You keep the app until the end of what you paid for.

    Cancel before a renewal and the next charge does not happen.

  • Two. Each computer takes a place the first time you sign in on it.

    A computer frees its place 7 days after it was last seen. You can also free a place from your account.

More questions

  • For new customers, yes, when v1.0 ships: $49 a month. Start before and you keep $29 a month while your plan stays active.

  • No. The app comes with every plan. The download opens in your account once your plan is active.

  • By card, on Stripe. We never see or store your card.

  • No. Senzoukria connects to Rithmic directly with the login your firm gave you.

  • CME futures such as ES, NQ, CL and GC on Rithmic, and crypto on Binance, Bybit and Deribit.

    ES, MES, NQ, MNQ, RTY, YM, GC, MGC, SI, CL, MCL, NG, ZB, ZN, ZC, ZS, 6E, 6B and about 30 more.

Common questions, step by step

Connect your data

  • Check the market is open, then close other platforms on your login. The CME data agreement may be missing.

    1. Look for a grey pill with a countdown on the chart.
    You should see: A pill means the market is closed. Prices come at the open.

    2. Close R | Trader Pro and any other platform using your login.
    You should see: Rithmic gives one live data session per login.

    3. Open Account › Connections from the menu (three lines, top left).
    You should see: One card per connection.

    4. On your card, click 'More' › 'Edit sign-in'.
    You should see: 'Edit sign-in' opens with your settings kept.

    5. Leave the password empty and click 'Connect'.
    You should see: 'Connecting to' shows the checks one after the other.

    6. Read the last check, 'Receiving market data'.
    You should see: 'Connected, but no market data is arriving' means Rithmic sent no price.

    7. Click 'I accepted it, check again' after accepting the CME agreements.
    You should see: The check runs again and shows the first price.

    If it does not work:You watch gold, oil or bonds and see nothing. Ask your firm if your data plan includes COMEX, NYMEX and CBOT.The message says another platform took over this login. Close the other platform, then click 'Reconnect' on the banner.Prices still do not come while the market is open. Click 'Contact support, the diagnostic is ready' under 'Still stuck?'.

    CME data agreements are accepted in Rithmic's app, R | Trader Pro. Rithmic or your firm can help there. Official page

  • Open the DOM and look at its MBO badge. Green means order by order data arrives.

    1. Click the 'DOM' tab at the right edge of the chart.
    You should see: The DOM opens next to the chart.

    2. Look at the MBO badge of the DOM.
    You should see: Hover it to read its state. 'MBO active: full order-by-order book' is the good one.

    3. Click the MBO badge.
    You should see: Settings opens at the MBO setting.

    4. Keep 'Order by order data (MBO)' on 'Auto'.
    You should see: 'Auto' is the default.

    5. Read 'MBO status'.
    You should see: 'MBO received' means it works. 'Not included in your Rithmic data subscription' means your plan lacks it.

    If it does not work:The status says 'Not included in your Rithmic data subscription'. Ask your firm or broker for CME order by order depth (MBO). Then open a new chart.The status says 'Not available for this source'. Use a direct Rithmic connection with R | Protocol. Bridges, crypto and R | API+ do not carry it.

    The depth subscription is sold by your broker or prop firm. Ask them for CME order by order depth (MBO).

  • Orders start switched off on every connection. Turn on the 'Orders' switch on the connection card.

    1. Open Account › Connections from the menu (three lines, top left).
    You should see: One card per connection.

    2. Check your card says 'Connected'. If not, click 'Connect'.
    You should see: The 'Orders' switch is grey until the card is connected.

    3. Click the 'Orders' switch on your card.
    You should see: 'Turn on orders for' asks you to confirm.

    4. Click 'Turn on orders'.
    You should see: The switch is on and the card says 'orders on'.

    5. Place your order again.
    You should see: The message 'Trading is disabled on this connection' is gone.

    If it does not work:There is no 'Orders' switch on the card. Bridges and R | API+ carry data only. For R | API+, open More › Edit sign-in › Advanced settings. Set 'Connection method' to R | Protocol.The switch is on and orders still fail. Open 'Report a problem' from the menu.

  • Read the connection line next to the source button. It names what is missing.

    1. Open Heatmap from the menu (three lines, top left).
    You should see: The Heatmap page opens with a rail on the left.

    2. Read the connection line next to the source button.
    You should see: For example 'Connecting · no book yet', or 'no market depth received'.

    3. Check that the market is open.
    You should see: CME futures are closed from Friday 16:00 to Sunday 17:00 Chicago time.

    4. Click the source button ('Chart source') and pick your Rithmic connection.
    You should see: The Rithmic line reads 'CME L2 + order-by-order (MBO)'.

    5. Click 'Try again' on a notice like 'No market depth received'.
    You should see: A new subscription opens. The button may show 'Retry in' and a countdown.

    6. Open Settings › Data and read 'MBO status'.
    You should see: 'MBO received' means the full book arrives.

    If it does not work:The line says 'no market depth received'. Ask your firm if your data plan includes depth (L2).Your source is a bridge, dxFeed or R | API+. Use a direct Rithmic connection. Those sources carry no order book.

    Depth (L2) comes with the data plan from your broker or firm.

    This can come from a known problem. If the steps do not help, open Report a problem in the app menu.

  • Add a connection, pick your firm, then type your Rithmic username and password.

    1. Open Account › Connections from the menu (three lines, top left).
    You should see: One card per connection, or 'No connection yet'.

    2. Click '+ Add connection'.
    You should see: 'Where is your trading account?' appears.

    3. Click 'At a prop firm'.
    You should see: 'Which firm is your account with?' appears.

    4. Click your firm, or type its name in 'Search a firm'.
    You should see: 'Before you connect' lists what to have ready.

    5. Click 'I'm ready, sign in'.
    You should see: 'Sign in with your Rithmic login' appears.

    6. Type your 'Rithmic username' and 'Password' from the firm's e-mail.
    You should see: Your password goes to the system keychain. It never shows again.

    7. Click 'Connect'.
    You should see: 'Connecting to' shows the checks one after the other.

    8. Click 'Open my first chart'.
    You should see: 'Connected' appears and your account is listed.

    If it does not work:Rithmic refuses the login. Use the Rithmic username from the firm's e-mail. The firm website login is refused here.Your firm is not in the list. Click 'Set it up by hand' or 'Ask us to add it'.Your account only works inside NinjaTrader or Quantower. Click 'Use the bridge'.

    Your Rithmic username and password come from your firm's e-mail. Ask your firm if you cannot find them.

  • Install the small Senzoukria add-on in NinjaTrader or Quantower. It passes the data you already receive.

    1. Open Account › Connections from the menu (three lines, top left).
    You should see: One card per connection.

    2. Click '+ Add connection'.
    You should see: 'Where is your trading account?' appears.

    3. Click 'NinjaTrader or Quantower on this PC' under 'Other ways to connect'.
    You should see: Two tiles: 'NinjaTrader 8' and 'Quantower'. This is Windows only.

    4. Click the 'NinjaTrader 8' tile, then 'Install the add-on'.
    You should see: Three steps appear. Each one ticks itself when Senzoukria sees it done.

    5. Click 'Install into NinjaTrader for me'.
    You should see: Step 1 ticks. The file OrderflowBridge.cs is copied into NinjaTrader's indicators folder.

    6. Let NinjaTrader compile the add-on.
    You should see: Step 2 ticks. Nothing after 20 s? In NinjaTrader open New › NinjaScript Editor and press F5.

    7. In NinjaTrader, put 'OrderflowBridge' on a Tick 100 chart.
    You should see: Tick Replay must be on. Step 3 ticks.

    8. Click 'Check the connection'.
    You should see: Each link ticks. Then click 'Open the chart' to see your data.

    If it does not work:You use Quantower. Close Quantower and click 'Install for me'. Start Quantower. Add 'QuantowerOrderflowBridge' from Indicators › Custom on one chart.NinjaTrader 8 is not found on this PC. Click 'or save the file'. Then copy it into NinjaTrader's indicators folder.You are stuck on a step. Click 'Watch how (1 min)' to see the steps.

    NinjaTrader and Quantower are other companies' programs. Their install, licence and accounts are their job.

  • Rithmic allows one subscription per instrument per login. Close the other window or platform using it, then retry.

    1. Close every other Senzoukria window, also one left in the notification area.
    You should see: Only one Senzoukria window is open.

    2. Close any other platform signed in with the same Rithmic login.
    You should see: R | Trader Pro, NinjaTrader and Quantower count too.

    3. Click 'Retry once the other session is closed' on the notice.
    You should see: The chart loads again.

    4. Wait a few minutes, then load the chart again.
    You should see: The server frees the old subscription by itself.

    If it does not work:Prices are already on screen. Keep working. The refusal only concerned a second request and nothing was lost.A banner says the same login is open elsewhere. Close it there, then click 'Reconnect' on the banner.

    Rithmic allows one live data session per login. Some firms sell a second login. Official page

  • CME futures are closed at weekends, so nothing new arrives. Replay a past day to see price move.

    1. Look for a grey pill with a countdown on the chart.
    You should see: Hover it to read 'Market closed' and the next open.

    2. Drag the chart sideways to look at earlier bars.
    You should see: Bars you already downloaded stay available.

    3. Open Replay from the menu (three lines, top left).
    You should see: 'Pick a session to replay.' appears on the 'Prepare' page.

    4. Click your contract in 'Contract'.
    You should see: The contract is marked as chosen.

    5. Click a past weekday in 'Day'.
    You should see: 'On this computer, opens at once' or 'Downloads from Rithmic, ~40 s'.

    6. Click 'Load session'.
    You should see: 'Loading' shows, then the chart opens. It is the same chart as live.

    If it does not work:'Load session' is greyed out. Connect Rithmic in Account › Connections. Or pick a day marked 'On this computer'.The chart has no earlier bars. Click the ⚙ button. Open 'Data and history'. Click '3 days' under 'History range'.

Find a command

  • Use 'Charts ▾' for two to four charts. Use 'Detach selected chart' for a second screen.

    1. Open Footprint from the menu (three lines, top left).
    You should see: The chart page opens.

    2. Click 'Charts ▾' in the top bar.
    You should see: A menu opens with the chart tabs and the layout buttons.

    3. Click a layout, for example 'Two columns'.
    You should see: Two charts sit side by side. The others are 'One chart', 'Two rows', 'Three charts', 'Three columns' and 'Four charts'.

    4. Click the symbol button in the bar of the new chart.
    You should see: The symbol search opens. Each chart keeps its own symbol and timeframe.

    5. For another screen, select the chart to move in 'Charts ▾'.
    You should see: That chart is selected.

    6. Click '⧉ Detach selected chart'.
    You should see: The chart opens in its own window.

    7. Drag that window to your other screen.
    You should see: The window stays there.

    If it does not work:'Detach selected chart' is greyed out. Close a chart window first. The limit is 16 windows.You want a whole new Footprint in another window. Click '⧉ New window' in the top bar.

  • Senzoukria has a local demo account. It is used in Replay and on live crypto charts. Nothing leaves your PC.

    1. Open Replay from the menu (three lines, top left).
    You should see: 'Pick a session to replay.' appears on the 'Prepare' page.

    2. Click a contract in 'Contract', then a past day in 'Day'.
    You should see: The day is marked on this computer or to download.

    3. Look at 'Account' on the same page.
    You should see: It reads 'Demo' with the starting balance. 'Edit' changes the limits.

    4. Click 'Load session'.
    You should see: The chart opens. It is the same chart as live.

    5. Place your trades in the session.
    You should see: Orders go to the demo account. Your broker account is never touched.

    6. Open Settings › Demo account and edit 'Starting balance'.
    You should see: It applies at once on an untouched account. After trades it waits for 'Reset the demo account'.

    If it does not work:You want live prices. Open Account › Connections › '+ Add connection'. Click 'I don't have an account yet'. Then click 'Open a live BTC chart'. The order dock reads 'Demo trading on'.You want demo orders on live CME futures. That needs a Rithmic account, such as a paid paper account. Delayed CME data is read-only.

  • Five places save a layout. Pick the one that matches what you want to keep.

    1. To keep one chart's look, open ⚙ › 'My templates'.
    You should see: Under 'Your templates', type a name and click 'Save'. 'Apply' loads it later.

    2. To keep the tiles of a page, open 'My pages' › 'Layout'.
    You should see: Click '+ Save this layout'. It is listed under 'My layouts'.

    3. To keep your chart windows, open 'Charts ▾' › 'Saved windows and layouts'.
    You should see: Your chart windows are listed. Click a name to show it. Click ✎ to rename it.

    4. To keep Footprint, Heatmap and GEX together, open 'Settings' › 'Templates'.
    You should see: Type a name and click 'Save current screens'. It is listed under 'Yours'.

    5. To keep a set of indicators, open 'Indicators' › 'Your kit'.
    You should see: Click 'Save current set', type a name and click 'Save'.

    If it does not work:You want the same look on another chart. Click 'Export' next to the template. On the other chart, click 'Import' and choose the file.'+ Save this layout' will not work. The page has no tiles yet. Add tiles first, then save their arrangement.You see 'Bar layout' in the chart settings. It sets where the candle and the numbers sit inside a bar. It is not a place to save a layout.

  • Click the 'T&S' tab on the right edge of the chart. A Time & Sales panel opens next to it.

    1. Open Footprint from the menu (three lines, top left).
    You should see: The chart page opens.

    2. Look at the right edge of the chart.
    You should see: A narrow column holds small tabs such as 'DOM', 'ACC', 'HM' and 'T&S'.

    3. Click 'T&S'.
    You should see: A 'Time & sales' panel opens next to the chart.

    4. Wait for the next trade.
    You should see: Each trade shows its time, price, size and side (Buy or Sell).

    5. Raise 'Min' to hide small trades.
    You should see: Rows smaller than that size disappear.

    6. Click 'T&S' again to close the panel.

    If it does not work:The panel says 'Waiting for trades'. The first trade shows as soon as it prints. Wait for it.The panel says 'CME Globex is closed'. Trades come back at the reopen. Replay shows past sessions.The panel says 'No trade-by-trade stream'. Your data source sends bars only. Pick a source that sends trades.

  • Click a drawing, then the star at the end of its bar. Type a name and click 'Save'.

    1. Click a drawing on the chart.
    You should see: Its bar appears above it, with color, width and style.

    2. Set the color, width and style in that bar.
    You should see: The drawing changes.

    3. Click the star at the end of the bar.
    You should see: A menu opens. Its tooltip says 'Save / apply style preset'.

    4. Type a name in 'Save current style as…'.

    5. Click 'Save'.
    You should see: The name is listed under the field.

    6. Later, pick the saved name in the star menu of another drawing.
    You should see: The drawing takes that style.

    If it does not work:You use 'Long plan' or 'Short plan'. Click the gear 'Advanced settings' in its bar. In 'Position settings', click 'Save as…' or 'Save as default'.The star has no 'Save current style as…' field. Names are for lines, rays, trend lines, rectangles, rulers, text and volume profiles. Other tools only show 'Reset to original style'.New drawings keep an old style. Click the star, then 'Reset to original style'.

  • Yes. Click the small 'MNQ' button on the quick ticket. Orders from this chart then go to the micro.

    1. Open an NQ chart with a live broker connection.
    You should see: The 'Quick ticket' shows on the chart.

    2. Find the small 'MNQ' button next to the 'LAST' price.
    You should see: It sits at the end of the price line.

    3. Hover the 'MNQ' button.
    You should see: The tooltip says the chart keeps showing NQ and orders go to the micro of the same month.

    4. Click 'MNQ'.
    You should see: The button changes to '→ MNQ' with the month code. The chart still shows NQ.

    5. Read the contract name on the ticket.
    You should see: The price, position and orders of the ticket follow the micro contract.

    6. Click the '→ MNQ' button again to send orders back to NQ.
    You should see: The button goes back to 'MNQ'.

    If it does not work:The button is greyed out. Close your position and cancel your orders on NQ and MNQ first.There is no 'MNQ' button. It shows on NQ, ES, YM, RTY, GC and CL charts with a live broker account. The demo account trades what it shows.The quick ticket is hidden. Turn on 'Quick ticket on the chart' in ⚙ › Trading on the chart.

  • Yes. In Scripting, click 'New indicator', pick a language, write, then 'Run', 'Save' and 'Show on chart'.

    1. Open the menu (three lines, top left) and click 'Scripting'.
    You should see: The page has four stages: Write, Test, Validate, Deploy.

    2. Click 'New indicator'. If you already have scripts, open 'New ▾' first.
    You should see: An editor opens in the 'Write' stage.

    3. Click 'JavaScript' or 'Python' in the 'Language' switch.
    You should see: Python needs a one-time engine download.

    4. Write your code in the editor.
    You should see: Everything runs on this computer. No network, no files, no broker.

    5. Click 'Run'.
    You should see: The result shows. An error names its line.

    6. Click 'Save'.
    You should see: Your script is in the library of Scripting.

    7. Switch on 'Show on chart'.
    You should see: The indicator is drawn. It joins 'My scripts' in the Indicators panel.

    If it does not work:You want a strategy. Choose 'New strategy' instead of 'New indicator'.You want a ready example. Open 'New ▾' and choose 'From the gallery'.

  • Click the ⚙ button in the chart bar. Its tooltip says 'Footprint settings'.

    1. Open Footprint from the menu (three lines, top left).
    You should see: A chart opens with a bar of buttons above it.

    2. Hover the ⚙ button in the chart bar.
    You should see: A tooltip says 'Footprint settings'.

    3. Click the ⚙ button.
    You should see: The 'Footprint settings' panel opens on the right.

    4. Type a word in 'Search settings…'.
    You should see: Matching settings show up, whatever their section.

    5. Click a section name, for example 'Price and time marks'.
    You should see: Nine sections show. They are: Quick start, Read the cells, Candle and bar, Price and time marks, Indicators. Then: Trading on the chart, Alerts and sounds, Data and history, My templates.

    If it does not work:The gear you clicked opens something else. The gear inside the DOM panel sets only the DOM. Use the ⚙ in the chart bar for the chart.You want settings for the whole app, such as language or performance. Open Settings from the menu (three lines, top left).You want the Heatmap page settings. Open 'Heatmap'. Press S, or click 'Settings' in its bar.

  • Use the trash icon at the bottom of the left tool column. Add a copy with '+ Add another'.

    1. Find the trash icon at the bottom of the left tool column.
    You should see: Its tooltip says 'Delete indicators or drawings'.

    2. Click the trash icon.
    You should see: A menu opens. Each line shows how many items it removes.

    3. Click 'Drawings on all symbols'.
    You should see: The drawings are gone. A short message confirms it.

    4. Press Ctrl+Z to bring them back.
    You should see: The drawings return.

    5. To add an indicator twice, open its settings in the 'Indicators' panel.
    You should see: '+ Add another' shows at the top of its settings.

    6. Click '+ Add another'.
    You should see: A second copy turns on with the same settings. Chips '#1' and '#2' switch between copies.

    If it does not work:You only want the drawings of the symbol on screen. Click 'Drawings on' followed by the symbol name, in the same menu.You want to remove indicators too. The same menu has 'All indicators' and 'Everything on this chart'.'+ Add another' is missing. It shows for Library indicators, VWAP, Volume Profile and Market Profile. The limit is 8 copies per chart.

  • Yes. Turn on the 'My trades' indicator. It draws your journal trades on the chart.

    1. Click 'Indicators' in the chart bar.
    You should see: The 'Indicators' panel opens.

    2. Type 'My trades' in 'Search by study, measure or data…'.
    You should see: 'My trades' shows in the results.

    3. Turn 'My trades' on.
    You should see: Each position shows its entry, its exits and the result.

    4. Hover a position on the chart.
    You should see: A card shows the average prices, fees, duration and each fill.

    5. Switch 'Labels' on in the settings of 'My trades'.
    You should see: The result of each position is written on the chart.

    If it does not work:Nothing shows. The indicator reads your Journal. It shows trades of the instrument on screen and of the connected account.Trades are grouped into one number. That happens when zoomed out. Zoom in to see each trade.

  • Open Replay from the menu or with Ctrl K. On the Welcome page, key 6 also opens it.

    1. Click the menu button (three lines) at the top left.
    You should see: A list of pages opens.

    2. Click 'Replay' under 'Trade and review'.
    You should see: The Replay page opens on 'Prepare'.

    3. On any screen, press Ctrl K, type 'replay' and pick 'Replay'.
    You should see: The Replay page opens.

    4. On the Welcome page, press the key 6.
    You should see: The Replay page opens.

    If it does not work:Ctrl K does nothing. Click 'Search the app' at the top of the menu.The key 6 does nothing. Click inside the page first. Make sure no text box has the focus.

  • Your trades show as cards in Journal, on the 'Today' page, in the box 'Today's trades'.

    1. Open Journal from the menu (three lines, top left).
    You should see: The Journal page opens.

    2. Click 'Today' in the list of Journal pages.
    You should see: The page of today opens.

    3. Find the box 'Today's trades'.
    You should see: It shows one card per trade of the day.

    4. Click a card.
    You should see: The trade opens with its details.

    5. Click 'All trades'.
    You should see: The full list of your trades opens.

    If it does not work:The box says 'No trade on this account today.' Check the account shown in the Journal side panel.Your Rithmic trade is missing. The Journal adds it 5 seconds after you are flat.

Set up your chart

  • App colors are in Settings › Appearance. Chart colors are in the ⚙ of the chart.

    1. Open Settings from the menu (three lines, top left).
    You should see: The Settings page opens.

    2. Click 'Appearance' in the list.
    You should see: 'Pure mode', 'Palette' and the home page style show.

    3. Under 'Palette', click 'Graphite', 'Slate' or 'Sand'.
    You should see: The app colors change at once, in every window.

    4. To change the green accent, click 'Customize'.
    You should see: 'Your palette' opens with a swatch for each color.

    5. Click the 'Accent' swatch and pick a color.
    You should see: The new color applies at once.

    6. For the chart, open ⚙ › 'Quick start'.
    You should see: 'Chart look' offers ready-made looks.

    7. Under 'Buyers and sellers', change the 'Bid' and 'Ask' colors.
    You should see: The Bid and Ask cells use the new colors.

    8. Open ⚙ › 'Candle and bar' › 'Candle colors'.
    You should see: Pick the colors of the candle body, up and down.

    If it does not work:Buy, sell, profit and loss colors stay the same. The palette never changes them. Change chart colors in the ⚙ of the chart.You want fewer glows and effects. Turn on 'Pure mode' in Settings › Appearance.

  • Open Settings › Performance. Click 'Apply recommended', or pick the 'Performance' mode.

    1. Open Settings from the menu (three lines, top left).
    You should see: The Settings page opens.

    2. Click 'Performance' in the list.
    You should see: Mode cards show: 'Performance', 'Balanced', 'Precision' and 'Manual'.

    3. Read 'Recommended for this PC'.
    You should see: The app read your PC and names a mode.

    4. Click 'Apply recommended'.
    You should see: Settings change. 'Undo' is offered.

    5. Or click the 'Performance' card.
    You should see: It sets 1× rendering, 30 days of crypto candles, a still globe and no motion.

    6. Open 'Rendering sharpness' and pick a lower value.
    You should see: Fewer pixels are drawn on large screens.

    7. Turn on 'Pure mode' in 'Appearance'.
    You should see: Glows, halos, blur and decorative motion go off, charts included.

    8. Turn on 'Reduce motion' in 'General'.
    You should see: Interface and chart animations stop.

    If it does not work:A message says 'Memory is getting low on this PC'. Closing other applications frees the most. The app has already closed its hidden pages.It is still slow after these steps. Open 'Report a problem' in the menu. Say your app version and your PC.

    This can come from a known problem. If the steps do not help, open Report a problem in the app menu.

  • A small grey note near the top left of the chart says why bubbles are hidden. Follow its hint.

    1. Look near the top left of the chart.
    You should see: A small grey line starts with 'Big Trades'.

    2. If it says 'Candle view required · zoom out', zoom out until candles show.
    You should see: The bubbles come back on candles.

    3. If it says 'Too many trades in this view', zoom in.
    You should see: Fewer trades are in view, so the bubbles return.

    4. If it says 'Only the {count} largest shown', open the settings of 'Big Trades'.
    You should see: 'Max shown' caps the number of bubbles.

    5. Raise 'Max shown'.
    You should see: More bubbles show. '0=inf' means no limit.

    If it does not work:You want bubbles over the cells. Turn on 'In footprint view' in the Big Trades settings, under 'Appearance'.Auto is on and 'Max shown' is greyed. In Auto, 'Selectivity (Auto)' sets the number of bubbles. Pick a lower step to see more.You see a white line, or no grey note. Open 'Report a problem' in the menu. Attach a screenshot of the chart.

    This can come from a known problem. If the steps do not help, open Report a problem in the app menu.

  • Big Trades settings are in Indicators › Big Trades. 'Auto detection' adapts to your symbol.

    1. Click 'Indicators' in the chart bar.
    You should see: The 'Indicators' panel opens.

    2. Type 'Big Trades' in 'Search by study, measure or data…'.
    You should see: 'Big Trades' shows in the results.

    3. Open the settings of 'Big Trades'.
    You should see: A block 'Auto detection' shows, and 'Detection' settings.

    4. Read 'Auto (off = Manual)'.
    You should see: On: the app sets the size from the last 30 minutes of trades.

    5. Read 'Selectivity (Auto)'.
    You should see: Five steps, from 'Low · 1 in 100' to 'Ultra · 1 in 10,000'. Each step keeps about three times fewer bubbles.

    6. Read 'Suggested for' followed by your symbol.
    You should see: Model cards. One click applies the settings of a model.

    7. With Auto off, read 'Filter' and 'Min trade size'.
    You should see: 'Filter' picks how the size is set. 'Min trade size' is the smallest print that becomes a bubble.

    8. Read 'Max shown'.
    You should see: It is the most bubbles drawn at once. '0=inf' means no limit.

    If it does not work:You see too many or too few bubbles. Change 'Selectivity (Auto)' by one step. In Manual, change 'Min trade size'.

  • Turn on 'Compact bars' to read cells without zooming, or 'Far view' to keep the footprint zoomed out.

    1. Click the ⚙ in the chart bar.
    You should see: The 'Footprint settings' panel opens.

    2. Click 'Read the cells'.
    You should see: The cell settings show.

    3. Find 'Bar layout', then 'Compact footprint'.
    You should see: A switch called 'Compact bars' shows.

    4. Turn on 'Compact bars'.
    You should see: Bars get narrow and readable. Numbers shorten, for example 1.2K.

    5. Adjust 'Bar width' if you want more or fewer bars on screen.
    You should see: The bars change width.

    6. Find 'Far view' below and turn it on.
    You should see: The footprint stays when you zoom out. Plain candles return below 'Candles below'.

    7. Drag 'Text size' under 'Quick start'.
    You should see: The cell text gets bigger or smaller.

    If it does not work:The chart says 'Some figures hidden at this zoom: widen the bars'. Zoom in a little, or use 'Compact bars'.Candles come back when you zoom out far. The mouse wheel zooms out to 5,000 bars at most. 'Far view' keeps the footprint on the way.

  • Open the chart ⚙, then 'Price and time marks'. Turn off 'Grid lines' and set 'Background'.

    1. Click the ⚙ in the chart bar.
    You should see: The 'Footprint settings' panel opens.

    2. Click 'Price and time marks'.
    You should see: 'Visibility' is the first block.

    3. Under 'Visibility', turn off 'Grid lines'.
    You should see: The grid disappears. 'Day separators' go with it.

    4. Scroll to 'Background and grid'.
    You should see: Two color rows show: 'Background' and 'Grid lines'.

    5. Click the color next to 'Background' and pick a color.
    You should see: The chart background changes.

    If it does not work:You cannot find the row. Type 'grid' in 'Search settings…' at the top of the panel.You want to change the colors of the whole app. Use Settings › Appearance › Palette.

  • Open ⚙ › Trading on the chart › Position lines. Change the 'Stop' color, line and thickness.

    1. Click the ⚙ in the chart bar.
    You should see: The 'Footprint settings' panel opens.

    2. Click 'Trading on the chart'.
    You should see: Order settings show, then 'Position lines' at the bottom.

    3. Scroll to 'Position lines'.
    You should see: Styles show: 'Classic', 'Solid tags', 'Axis rail', 'Subtle', 'Neon', 'Zones'.

    4. Click a style, for example 'Solid tags'.
    You should see: The lines take that look on every chart.

    5. Under 'Per line', click 'Stop'.
    You should see: 'Colour', 'Line' and 'Thickness' show for the stop.

    6. Pick a stronger 'Colour' and a larger 'Thickness'.
    You should see: The stop line changes on the chart.

    7. Turn on the shade 'Shade between the entry and the stop'.
    You should see: A shaded zone shows between the entry and the stop.

    8. Turn on 'Alert'.
    You should see: The stop lights up when price is within the ticks you set.

  • Pick a zone in Settings › General › 'Time axis timezone'. 'LCL' follows your computer clock.

    1. Open Settings from the menu (three lines, top left).
    You should see: The Settings page opens.

    2. Click 'General' in the list.
    You should see: 'Language' and 'Time axis timezone' show.

    3. Open 'Time axis timezone'.
    You should see: A list shows LCL, UTC, NY, CHI, LON, PAR, TYO and SGP.

    4. Pick a zone.
    You should see: Open charts change at once.

    5. For one chart only, open its ⚙ › 'Price and time marks' › 'Timezone'.
    You should see: A list shows 'Local (system)', 'UTC', 'New York (ET)', 'Chicago (CT)' and more.

    If it does not work:The hour is still wrong with 'LCL'. 'LCL' copies your computer's time zone. Check it on your computer.Your version is older than 0.93.0. Update the app. From 0.93.0, the zone chosen in Settings reaches charts that are already open.

    Your computer's time zone is set in Windows. Senzoukria only copies it when you pick 'LCL'.

  • Open ⚙ › Read the cells. Drag 'IMB ratio' under 'Imbalance (IMB)'. It starts at 200 %.

    1. Click the ⚙ in the chart bar.
    You should see: The 'Footprint settings' panel opens.

    2. Click 'Read the cells'.
    You should see: The cell settings show.

    3. Find the block 'Imbalance (IMB)'.
    You should see: It holds 'IMB ratio', 'Absolute floor' and 'Convention'.

    4. Drag the 'IMB ratio' slider.
    You should see: It shows a percent and a factor, for example 200 % (2.0×).

    5. Read the line 'Convention'.
    You should see: It says if the chart compares bid and ask on the same row (Vertical) or with the next cell (Diagonal).

    6. Change 'Absolute floor' if needed.
    You should see: The dominant side also needs this many contracts.

    If it does not work:'Stacked Imbalances' did not change. It has its own ratio in the 'Indicators' panel. The ratio here never colors the stacks.You use the Diagonal convention. Diagonal compares neighbouring cells. Its usual setting is 300 %.

  • In ⚙ › Read the cells › Bar layout, click the preset 'Candle inside Bid × Ask'.

    1. Click the ⚙ in the chart bar.
    You should see: The 'Footprint settings' panel opens.

    2. Click 'Read the cells'.
    You should see: The cell settings show.

    3. Find 'Bar layout', then 'Presets'.
    You should see: Several presets show.

    4. Click 'Candle inside Bid × Ask'.
    You should see: Bid | candle | Ask. Each side reads its number against the candle.

    5. Check 'Side order'.
    You should see: 'Bid | Ask' puts Bid on the left. 'Ask | Bid' flips the two sides.

    6. If the cells show other numbers, open the cell type button in the chart bar.
    You should see: Pick 'Bid × Ask'. Each cell then writes its bid and its ask.

    If it does not work:You want to undo the preset. Click 'Undo' in the message that follows.You only want the candle in the middle. Under 'Candle', set 'Position' to 'Bid | Ask'.

Understand what you see

  • Open GEX, pick a source, add its key. Numbers move during US options hours, 09:30 to 16:00 New York time.

    1. Open the menu (three lines, top left) and click 'GEX'.
    You should see: The GEX page opens.

    2. Pick a source when the page asks 'Where should the chain come from?'.
    You should see: The list has Market Data, Core Convexity, ThetaData, Databento and Deribit.

    3. If you see 'Options data key required', click 'Open API keys'.
    You should see: Account › API keys opens.

    4. Paste your key in the card of that provider and save it.
    You should see: A saved key is never shown again.

    5. Go back to 'GEX'.
    You should see: 'Overview' shows net gamma, the 0DTE share and the key levels.

    6. Open GEX while US options trade: 09:30 to 16:00 New York time.
    You should see: The rail shows the age of the chain. In Tokyo that is 23:30 to 06:00 in winter.

    If it does not work:You use ThetaData. Save your key in Account › API keys. Pick ThetaData and follow the line under the list.You want the levels on your chart. Switch on 'GEX levels' in Indicators › Overlays.The page does not move at night. US options trade 09:30 to 16:00 New York time. Deribit crypto options run around the clock.

    Your options data key and plan come from your provider, for example ThetaData. A free ThetaData Options plan gives no GEX. Official page

  • Yes. 'Volume Profile (session)' has a 'Period' setting. Pick Weekly, Month or Regular hours.

    1. Click the 'Indicators' button in the chart bar.
    You should see: The Indicators panel opens.

    2. Switch on 'Volume Profile (session)' in 'Overlays'.
    You should see: A profile with POC, VAH and VAL is drawn.

    3. Open its row and find 'Period' under 'Type'.
    You should see: The default is 'Session'.

    4. Pick 'Weekly (Monday 00:00 UTC)', 'Month' or 'Regular hours (08:30 to 15:00 CT)'.
    You should see: The profile is redrawn for that period.

    5. For a moving window, pick 'Last 7 days (rolling)' or 'Custom…'.
    You should see: Custom counts minutes, hours or days, up to 180 days.

    If it does not work:The profile starts later than you expect. Only loaded bars count. Raise ⚙ › 'Data and history' › 'History range'.You want a weekly or monthly VWAP. Open 'VWAP' in 'Overlays' and set 'Anchor' to 'Week', 'Month' or 'Regular hours'.

  • Three tools in Indicators. 'Bar totals' shows delta on each bar. 'CVD' and 'Delta Profile' are panels.

    1. Click the 'Indicators' button in the chart bar.
    You should see: The Indicators panel opens.

    2. For delta on each candle, switch on 'Bar totals' in 'Overlays'.
    You should see: Ask, Bid and Delta are written above or below each bar.

    3. For the running total, switch on 'CVD' in 'Panels'.
    You should see: A CVD panel opens under the chart.

    4. To choose when CVD starts over, open its row and set 'Reset'.
    You should see: The default is 'Each session'. 'Each week' is another choice.

    5. For delta by price level, switch on 'Delta Profile' in 'Panels'.
    You should see: A panel shows who controls each price level.

    6. Open the 'Delta Profile' row and set 'Period' and 'Panel style'.
    You should see: Period runs from Visible range to Month. Style is Centre line or Ladder.

    If it does not work:A panel covers fewer days than you expect. Only loaded bars count. Raise ⚙ › 'Data and history' › 'History range'.

  • Open the gear ⚙, 'Read the cells', 'Row resolution'. Set 'Grouping' to 'Fixed', then 'Ticks per row'.

    1. Click the gear (⚙) in the chart bar.
    You should see: 'Footprint settings' opens.

    2. Open 'Read the cells'.
    You should see: 'Row resolution' is in the list.

    3. Find 'Row resolution'.
    You should see: 'Grouping' is the first line. One row is one tick by default.

    4. Set 'Grouping' to 'Fixed: a step you choose'.
    You should see: 'Ticks per row' appears.

    5. Set 'Ticks per row'.
    You should see: Steps are powers of two. The chart prints 'Rows: n × STEP' in the top-left corner.

    If it does not work:You want rows that follow your zoom. Set 'Grouping' to 'Automatic: merge levels when zoomed out'.You use the TPO profile chart. In the chart style menu, pick 'TPO profile'. Set 'Row height' to 'Custom ticks'.You trade crypto. Crypto charts have no row menu. The step follows the pair.

  • Yes. Switch on 'Absorption cells' or 'Absorption Zones' in Indicators › Overlays. Both start switched off.

    1. Click the 'Indicators' button in the chart bar.
    You should see: The Indicators panel opens.

    2. Go to 'Overlays'.
    You should see: 'Absorption cells' and 'Absorption Zones' are in the list.

    3. Switch on 'Absorption cells'.
    You should see: Green marks show at a bar's low. Red marks show at its high.

    4. Switch on 'Absorption Zones' if you want rectangles.
    You should see: A rectangle marks price levels where one side dominated.

    5. Open the 'Absorption cells' row and lower 'Sensitivity'.
    You should see: More cells show. The marks describe past bars. They do not forecast a bounce.

    If it does not work:You cannot find the row. Type 'absorption' in the search box of the Indicators panel.The overlay shows nothing. Load more days: ⚙ › 'Data and history' › 'History range'.

  • Click an indicator in Indicators, then its 'Study guide' bar. 'Open in Guide' shows the chapter.

    1. Click the 'Indicators' button in the chart bar.
    You should see: The Indicators panel opens.

    2. Click the name of an indicator.
    You should see: Its settings open on the right.

    3. Click the 'Study guide' bar at the top of the settings.
    You should see: It shows the kind of measure, 'Unit', 'Required data' and a note.

    4. Read the kind of measure, for example 'Proxy', 'Estimate' or 'Source dependent'.
    You should see: It says how far the number can be trusted.

    5. Click 'Open in Guide' next to the tabs.
    You should see: The Guide opens on the chapter of that indicator.

    If it does not work:There is no 'Study guide' bar. Not every indicator has one. Open 'Guide' in the menu and read the chapter 'Indicators and scripting'.You ask about the 'Long plan' and 'Short plan' tools. They are drawings. They never send an order. Use the DOM, an order ticket, the right-click menu or a hotkey.

  • Opening Range (ORB) is in the Library. No tool is named IVB. 'Initial Balance' is the nearest.

    1. Click the 'Indicators' button in the chart bar.
    You should see: The Indicators panel opens.

    2. Open 'Library'.
    You should see: A list of groups shows.

    3. Open the group 'Structure & sessions'.
    You should see: 'Opening Range' is in the list.

    4. Switch on 'Opening Range'.
    You should see: Lines mark the high and low of each session's first minutes.

    5. Open its row and set 'Duration (min)'.
    You should see: Choices are 5, 15, 30 or 60 minutes. The default is 15.

    If it does not work:You want the initial balance. Switch on 'Initial Balance' in the group 'Profiles & levels'. It uses the first 60 minutes by default.A session shows no lines. The chart must hold the start of that session. Raise ⚙ › 'Data and history' › 'History range'.

History and timeframes

  • The default is 24 hours (today). Change it in ⚙ › 'Data and history' › 'History range'.

    1. Click the gear (⚙) in the chart bar.
    You should see: 'Footprint settings' opens.

    2. Open 'Data and history'.
    You should see: 'History range' is in the list.

    3. Under 'History range', pick '3 days', '7 days' or more.
    You should see: Choices: 24 hours (today), 3, 7, 14, 30 days. 'Custom' takes 1 to 31 days.

    4. Wait until the loading bar is full.
    You should see: Older candles fill in on the left. Every intraday timeframe uses the same 1-minute history.

    5. If a hole stays, click 'Reload history' in the same list.
    You should see: The missing windows load again.

    If it does not work:Your PC feels slow after a long range. Pick '3 days'. A long range needs more memory.Tick, Range or Volume bars look short. They use the same 'History range'. Raise it, then click 'Reload history'.You trade crypto. Set 'Crypto history and profiles' in the same list.

  • First click ⚙ › 'Data and history' › 'Reload history'. If it comes back, pick fewer days.

    1. Click the gear (⚙) in the chart bar.
    You should see: 'Footprint settings' opens.

    2. Open 'Data and history'.
    You should see: 'Reload history' is in the list.

    3. Click 'Reload history'.
    You should see: The history loads again. Your cache and the live feed keep running.

    4. Wait for the loading bar.
    You should see: The bar fills and the candles appear.

    5. Look at the badge at the top right.
    You should see: It says CONNECTED when the feed really streams.

    If it does not work:The chart stalls again at the same place. Set 'History range' to '3 days', then click 'Reload history'.The forming candle stays still on 30m or a typed timeframe. Update to version 0.94.0 or newer. Its notes list a fix for this.It still fails. Open 'Report a problem' in the menu. Say the percentage where it stopped.

    This can come from a known problem. If the steps do not help, open Report a problem in the app menu.

  • Pick 'Range' in the bar type menu. History length follows the 'History range' setting, 1 to 31 days.

    1. Click the bar type chip in the chart bar ('5m ▾').
    You should see: 'Bar type' opens with Time, Tick, Volume, Range, Renko and Delta.

    2. Click 'Range'.
    You should see: Presets 4, 6, 8, 10, 12, 16 and 20 appear. The number counts price ticks of the grid.

    3. Click a preset, or type your number in 'Custom' and press Enter.
    You should see: The chip shows R and your number, for example R8.

    4. Click the ⚙ button of the chart bar.
    You should see: 'Footprint settings' opens.

    5. Open 'Data and history' › 'History range'.
    You should see: 'Range' offers 24 hours (today), 3, 7, 14, 30 days and 'Custom'.

    6. Click a longer range, for example '7 days'.
    You should see: Range bars are rebuilt from the ticks of that range. The first load takes longer. Past 8 days, data downloads again each time you open the chart.

    7. Click 'Reload history' if you see a hole.
    You should see: History loads again. Your cache and the live feed keep going.

    If it does not work:'Range' is greyed out with 'n/a'. Switch the chart source to Rithmic or Binance. Other sources grey out Tick, Range and Volume bars.History stops earlier than the range you asked. Read the notice 'History goes back {loaded} days of the {requested} requested'. Your account's archive may not go further.

Account and billing

  • Tick both boxes at the top of the sign-up page. The app asks for a password, even for Google users.

    1. Click 'Create account' on senzoukria.com.
    You should see: The page 'Create your account' opens.

    2. Tick 'I have read and accept the Terms of Service'.
    You should see: The first box shows a tick.

    3. Tick 'I have read and accept the Privacy Policy'.
    You should see: The buttons stop being grey.

    4. Click 'Create account with email'.
    You should see: A form opens: Email, Password, Confirm password. Use 8 characters or more.

    5. Fill the form and click 'Create account'.
    You should see: 'Account created! Redirecting…'

    6. Signed up with Google? In the app, click 'Forgot password? Signed up with Google?'.
    You should see: Your browser opens 'Forgot your password?'.

    7. Type your email and click 'Send reset link'.
    You should see: 'Check your inbox'. The link works for 24 hours.

    8. Open the link in the e-mail and choose a password. Then sign in to the app.

    If it does not work:A button is still grey. Scroll to the top. Both the Terms box and the Privacy box need a tick.No e-mail arrives. Check the spelling of your address, then send the link again.

  • $9 for 14 days, then $20 for the first month, then $29 a month. There is no free trial.

    1. Open senzoukria.com/pricing.
    You should see: The monthly plan and its price steps show.

    2. Click 'Start monthly'.
    You should see: A panel opens with four boxes to tick.

    3. Tick the four boxes.
    You should see: The button 'Continue to payment' becomes active.

    4. Click 'Continue to payment'.
    You should see: Stripe opens. It shows the exact amounts before you confirm.

    5. To stop before the first full month, cancel before day 14.
    You should see: Nothing else is charged.

    If it does not work:You look for a free plan. There is none. The $9 pays your first 14 days of the full app. You need a card.You want another plan. Open the plan choices on senzoukria.com/pricing. Prices and dated offers show there.

    Your firm or broker bills the market data. Exchange fees stay with them.

Install and launch

  • Left-click the icon near the clock. No window? Quit from the icon, then open the app again.

    1. Find the Senzoukria icon in the notification area, near the clock.
    You should see: Its tooltip says 'Senzoukria'.

    2. Left-click the icon.
    You should see: The main window opens.

    3. If nothing opens, right-click the icon and click 'Open Senzoukria'.
    You should see: The main window opens.

    4. Still nothing? Right-click the icon and click 'Quit Senzoukria'.
    You should see: The icon disappears.

    5. Open Senzoukria again from the Start menu.
    You should see: It is listed as 'OrderflowV2' for now.

    If it does not work:The window still does not appear. The window needs Microsoft Edge WebView2. Write to support at senzoukria.com/contact and say what you see. Never send a password.The app freezes a few seconds after it opens. Click 'Ask on Discord' on senzoukria.com/setup. Send your version and the exact message.

    Windows and Microsoft Edge WebView2 come from Microsoft. Windows 11 has WebView2. On Windows 10 our installer adds it if it is missing.

    This can come from a known problem. If the steps do not help, open Report a problem in the app menu.

Your question is not here?Ask on Discord. Someone usually answers the same day.
Ask on Discord

All product and company names are trademarks of their respective owners. Senzoukria is independent and is not affiliated with or endorsed by any of them.